What is a benefit of curved shaft trimmers?
A curved shaft usually means a shorter shaft. This results in a lighter string trimmer, which can be beneficial for longer jobs. Curved shaft trimmers also tend to feel well-balanced, which helps with maneuverability in close areas. via
Are Straight Shaft trimmers more powerful?
Straight shaft trimmers have features designed with greater durability, increased versatility, and higher power output in mind. via
What are straight shaft trimmers best for?
Straight shaft trimmers are good for hard to reach places such as under decks, behind trees and around fences. These shafts put more distance between the ground and the operator for better reach, and less risk of kickback debris. via
Can you edge with a curved shaft trimmer?
Here's a tip for using curved shaft trimmers:
Position the trimmer at 90 degrees to the area you're edging. Move the end of your trimmer slowly from left to right along the edge of your garden bed. You should notice a nice vertical edge being created as the trimmer cuts through excess grass and debris. via
Are Homelite trimmers any good?
It does fine, not as loud as my old Stihl but it did a good job. My only complaint is the fuel tank is too small, cutting down on use time. UPDATE: So far this summer the Homelite 26cc trimmer has proven to be a disappointment. It simply is not powerful enough to get the job done. via
Why do straight shaft trimmers turn counter clockwise?
1) Most straight shaft trimmers spin their string counter clockwise. As a result, when these trimmers are used to trim against a wall, they cut through the grass much more cleanly and efficiently when moved along said wall from right to left. via
What's better 2-cycle or 4 cycle trimmer?
With fewer moving parts, 2-stroke string trimmers are dependable tools. They weigh little and vibrate less than 4-stroke trimmers, which reduces operator fatigue and makes for a better trimming experience. They also require less maintenance. In most cases, you can even store a 2-stroke more easily, too. via
How often should you edge your lawn?
What is a split shaft trimmer?
A split shaft is designed to come apart so that you can attach another tool (e.g., leaf blower, hedge trimmer, etc.). Straight shaft trimmers will be heavier than the curved shafts ones, and this means that they will vibrate less and hence reducing user fatigue from extended periods of use. via
How do you cut the edges of a whipper snipper?
Are Homelite and Ryobi the same company?
Yes Ryobi and Homelite are both currently owned and manufactured by the same company - TTI (TechTronics Industries) if the part number your machine uses is the same, the part is the same. via
Is Homelite a Home Depot brand?
Is Homelite a Home Depot brand? Homelite Corporation is a manufacturer of chain saws, blowers and lawn edgers sold at Home Depot. via
How do I reload my Homelite trimmer?
How thick can a brush cutter cut?
Brush cutters are similar in appearance to line trimmers, but a trimmer uses a thin nylon string that cuts vegetation such as long grass or weeds, while a brush cutter uses a metal blade that cuts through dense vegetation and tree trunks up to 4 inches thick. via
How many cc is a brush cutter?
Gas-powered engines measure in cubic centimeters of displacement (cc). Handheld brush cutters range from 24 to 50cc. Handheld brush cutters with power over 56V or 35cc are considered heavy duty. via
What should I look for in a brush cutter?
Things to consider when choosing a brushcutter. High power, high torque and rapid acceleration are important when cutting through vegetation, but don't select a machine that is unnecessarily heavy if you are working long days. Make sure the harness spreads the load, for comfortable use and efficiency. via
Which way do Stihl trimmers spin?
STIHL does not produce a straight shaft trimmer that turns clockwise. Only our curved shaft trimmers do. via
Which direction should you Weedeat?
Understand the direction of the spinning
It is enough if your unit ejects grass and debris from its path while cutting without harming you and people around. If it spins counter-clockwise, you should cut grass from the right side, and eject remains from the left one. via
How do you hold a string trimmer?
Hold the string trimmer firmly with both hands on the right side of your body, so the muffler faces away from you. Your left arm should be straight and your right arm slightly bent. Stand straight and hold the trimmer at waist level. The cutting head will still reach the grass. via
Are Stihl trimmers 4-cycle?
Stihl packs a 28.4 cc 4-Mix engine in the FS 91 R. It's a 4-stroke engine that still requires you to premix your fuel at a 50:1 ratio. Since not having to premix fuel is one of the major benefits of a 4-stroke engine, it seems a bit odd to go the route Stihl does. via
What happens if you put 2-cycle gas in a 4 cycle engine?
A 2 stroke engine uses regular gasoline to which you add a small amount of oil. You can run a 4 stroke motor with fuel youve mixed for a 2 stroke. You may have oil smoke from the exhaust or foul plugs over some time, but it wont hurt the engine. via
What happens if you put 4-cycle oil in a 2-cycle engine?
In a pinch, you may be tempted to run a 2-cycle engine by adding 4-cycle oil to the gas, but according to a lawn and garden equipment article published by the University of Tennessee Agricultural Extension Service, you should never mix 4-cycle oil with gasoline in a two-cycle engine, which would damage the engine and via
Is brushless string trimmer worth it?
The benefits of a brushless tool are that the motor will last longer, run more efficiently, and the batteries will hold a charge longer. You also never need to worry about replacing worn out brushes. A brushless motor is always going to be better than the same tool with a motor that uses brushes. via
How do you keep grass from growing over edging?
Should you edge every time you mow?
Fertilization helps a lawn look healthy thick and green. When your lawn begins to grow faster, you'll need to mow and edge more frequently to maintain a clean finished look. You may not need to edge every time you mow but you'll still want to assess the integrity of your edge lines after each mowing. via
How deep should I edge my lawn?
With either method, cut only about 2 inches deep, and be wary of buried pipes and cables. This depth may seem arbitrary, but it's one most power-edgers reach and tends to be sufficient for controlling root spread. Two inches is a rough guide, but it's your choice. See what depth will be easiest to handle throughout. via
Is straight or curved trimmer better?
Often slightly lighter in weight than a straight trimmer, the shaft also is a bit shorter because of the curve. This gives users more control, but not as much flexibility of use; straight trimmers usually enable you to trim in tight areas that a curved shaft has trouble reaching. via
Are ego trimmers any good?
Overall, I strongly recommend the EGO 56v Lithium-Ion Cordless String Trimmer if you are looking for a weed whacker that doesn't require gas, is lightweight, easy to load, and has long run and fast charge times. via
How do you use an ego edger?
How do I cut the edges of my lawn straight?
Re-cut the edges of your lawn in spring with a half-moon edging tool. For a straight edge, cut against a plank of wood; for a curve, trim along a rope laid on the edge of the lawn. Alternatively, simply follow the existing curve of the lawn. via
Should you mow or whipper snip first?
So, if you are to ask us what should come first, we would say whipper snip. Then mow the lawn and if you have an edger then do the edge. Trim, mow, edge and blow. Some even trim the edges and give it a blow before they mow as well – whatever makes you happy and provides the best result. via