What does a FRAM PH3600 fit? Model: PH3600. Fits the following vehicles: Allis-Chalmers, Ariens, Badger Dynamic, Basic Equipment, Bolens, 09-03 Chrysler, Davis, Dig-R-Mobile, 05-03 Dodge, 08-02 Dodge Truck, Excel, Ford, 09-81 Ford, 73-71 Ford, Ford (Gasoline Industrial), 09-86 Ford Truck, G.H. Tennant, Gehl, Gravely, Gwf Mfg. via
What does a PH3980 oil filter fit?
Fram PH3980 Extra Guard Oil Filter. Fits 4.3L ALPHA 4V - 4.3L (GEN +) (4BBL) Reman & 4.3L CARB ALPHA/BRAVO - 4.3L CARB ALPHA/BRAVO engines. via
What does FRAM PH8A oil filter fit?
According to the FRAM oil filter guide, the FRAM PH8A is used on applications covering the following engines from various makes including Chrysler, Dodge, Ford, Jeep, and Mazda: V8 2.6L. V8 4.1L. V8 4.5L. via
What does a Fram oil filter HM3600 fit?
Squeeze more performance out of your older vehicle with an FRAM High Mileage Oil Filter HM3600. It's specifically designed for cars, trucks, vans and other vehicles with over 75,000 miles. via
What engine does a Fram PH30 oil filter fit?
Fram PH30 oil filter is a spin on style and fits most of the popular marine engines such as Aero Marine, Chris Craft, Chrysler, Crusader, Daytona, Indmar, Mercruiser, OMC, Pleasurecraft and Volvo. via
What does a FRAM PH3506 oil filter fit?
Fram, PH3506 Oil Filter, 1998-1996 Buick, 1977-1975 Buick, 2004-2003 Buick Truck, 2004 Cadillac, 2004-2003 Cadillac Truck, 2004-1996 Chevrolet, 2005-2002 Chevrolet/GMC Truck, 1999 Chevrolet/GMC Truck, 2004-2003 GMC, 2004-2003 GMC Gasoline, 1999 GMC Gasoline, 2004-2003 GMC Truck, 2004-2002 Hummer Truck, Indmar Marine, via
What oil do I use in a 4.3 MerCruiser?
Mercury Marine, the manufacturer of the 4.3L MerCruiser engine, specifies that the owner use Mercury MerCruiser Full-Synthetic Engine Oil, 20W-40, with a NMMC EC-W rating. This specific oil is recommended by the company for all MerCruiser engines, including the 4.3L. via
What oil filter does a Ford 302 use?
The standard filter for a 302 is a Motorcraft FL-1A, Wix 51515, Fram PH-8A and any other filter that interchanges with those numbers. via
What does a Acdelco pf47e oil filter fit?
This filter fits your GM vehicle, as well as a wide range of other vehicles on the road today. Its unique element design yields more filtering area in a smaller canister. via
Are Fram oil filters good?
Fram oil filters are not as bad as people make them out to be. Fram oil filters are actually tested to filter out particulate matter to a point, and are torture tested to make sure they'll survive even the roughest conditions. Fram Oil filters will be just fine for your engine. via
How much oil does a 5.3 Vortec take?
Capacity: 6 quarts (with filter)After refill check oil level. via
What oil does a 5.3 Vortec take?
According to the owner's manual for the 2020 Chevy Silverado, SAE 0W-20 engine oil should be used for models outfitted with the 5.3L and 6.2L V8 engines. Models equipped with the 2.7L L4, 4.3L V6, or the 6.6L V8 require SAE 5W-30 engine oil. via
Which is better 10w30 or 20W40?
20w 40 is a thicker oil when compared to the original 10w 30 oil. So 10w 30 oil is going to flow better than 20w40 oil when you initially start it and also run it. If the oil flows better the better the oil will lubricate and protect engine parts. via
What kind of oil goes in a MerCruiser lower unit?
You can use any brand of lubricant that has a grade designation of API GL5 SAE 80 or 90 weight. Make sure you do not mix different oil brands or weights. into the BOTTOM drain hole. Then slowly squeeze the bottle to force the oil into the lower unit. via
How much oil does a 302 Windsor hold?
302 for both a car and truck take 5 qts, 4 in the pan, one in the filter. via
What is the difference between pf47 and pf47e?
The pf47 is the original design, where the pf47e is the new "e-core" design filter. They both fit the same on your vehicle, the E-type is just a bit more expensive and has a differently designed core which is said to perform better, and has an overall smaller design. the original pf47 will be phased out soon. via